Product Information
Explore detailed specifications and features
| Item | Detail |
|---|---|
| Product Name | Electronic Throttle Body Assembly (ETB) |
| Connector | 6-Pin (Hyundai/Kia Kappa Standard) |
| Engine | 1.0L / 1.2L Kappa MPI (G3LA / G4LA) |
| Housing Material | Die-Cast Aluminum Alloy |
| Seal Material | Viton (Oil-Resistant Fluorine Rubber) |
| OE Numbers | 35100-04220 / 3510004220 / 35100-04200 / 3510004200 |
| Warranty | 12 / 24 Months |
| Make | Model | Engine | Years |
|---|---|---|---|
| Kia | Picanto II (TA) | 1.0L / 1.2L Kappa MPI (G3LA / G4LA) | 2011–2015 |
| Kia | Morning (TA) | 1.0L / 1.25L Kappa MPI | 2011–2015 |
| Kia | Picanto (JA) | 1.0L / 1.2L Kappa MPI | 2017+ (verify OE) |
Note: For 1.0L and 1.2L Kappa MPI naturally aspirated petrol engines only. For Picanto JA (2017+), always verify OE number before ordering. Always verify OE number before ordering.
This OEM-grade electronic throttle body assembly is a direct throttle body replacement for Kia Picanto II TA and Morning TA with 1.0L/1.2L Kappa MPI naturally aspirated petrol engines (2011–2015). Whether you need a full throttle body replacement after throttle body actuator failure, a throttle body tps sensor fault, or a scheduled throttle body service, this unit is manufactured to Kia OEM specifications for precise throttle response and long-term reliability. The die-cast aluminum housing and Viton throttle body gasket seals ensure airtight fitment with no wiring modification required. Please verify your OE number before ordering.
- OEM-Grade Throttle Body Assembly – Direct replacement; resolves issues that throttle body cleaning alone cannot fix.
- Kia Kappa Engine Optimized – Engineered for Picanto/Morning 1.0L–1.2L Kappa MPI platforms.
- Dual Redundant TPS (Throttle Body TPS Sensor) – Prevents idle fluctuations and false error codes caused by a faulty throttle body position sensor.
- Viton Gasket & Seals – Oil-resistant fluorine rubber for long-term airtight fitment.
- 100% Factory Tested – Full throttle body actuator stroke and response calibration before shipment.
- Connector: 6-Pin (Hyundai/Kia Kappa Standard)
- Engine: 1.0L / 1.2L Kappa MPI (G3LA / G4LA)
- Housing: Die-Cast Aluminum Alloy
- Seal / Gasket: Viton
- OE Ref: 35100-04220 / 35100-04200
- Warranty: 12 / 24 Months
Installation must be performed by a professional. After fitting, a throttle body relearn procedure is required to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for Kia Kappa platforms. Disconnect the negative battery terminal for 5 minutes before installation. Install a new throttle body gasket (sold separately) and torque bolts to the manufacturer’s specification. Reconnect battery, turn ignition ON for 10 seconds, then OFF for 10 seconds. Start engine and idle for 5 minutes without touching the accelerator. Use Kia KDS or compatible OBD-II scanner to perform “Throttle Body Adaptation” or “ETC Learn” if issues persist. Non-professionals should not attempt installation, as improper fitting may result in throttle body malfunction. The instruction manual included in the package is for professional reference only.
Confirm your vehicle model matches the listing.
Compare product photos with your original throttle body assembly.
Locate the original part number (OE) on your component — look for 35100-04220 or 35100-04200.
Contact us with your part number if unsure — our team can assist with throttle body sensor replacement compatibility and fitment questions.
Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer’s reasons, the buyer will be fully responsible, and refunds will not be provided.
| Item | Detail |
|---|---|
| Product Name | Electronic Throttle Body Assembly (ETB) |
| Connector | 6-Pin (Hyundai/Kia Kappa Standard) |
| Engine | 1.0L / 1.2L Kappa MPI (G3LA / G4LA) |
| Housing Material | Die-Cast Aluminum Alloy |
| Seal Material | Viton (Oil-Resistant Fluorine Rubber) |
| OE Numbers | 35100-04220 / 3510004220 / 35100-04200 / 3510004200 |
| Warranty | 12 / 24 Months |
| Make | Model | Engine | Years |
|---|---|---|---|
| Kia | Picanto II (TA) | 1.0L / 1.2L Kappa MPI (G3LA / G4LA) | 2011–2015 |
| Kia | Morning (TA) | 1.0L / 1.25L Kappa MPI | 2011–2015 |
| Kia | Picanto (JA) | 1.0L / 1.2L Kappa MPI | 2017+ (verify OE) |
Note: For 1.0L and 1.2L Kappa MPI naturally aspirated petrol engines only. For Picanto JA (2017+), always verify OE number before ordering. Always verify OE number before ordering.
This OEM-grade electronic throttle body assembly is a direct throttle body replacement for Kia Picanto II TA and Morning TA with 1.0L/1.2L Kappa MPI naturally aspirated petrol engines (2011–2015). Whether you need a full throttle body replacement after throttle body actuator failure, a throttle body tps sensor fault, or a scheduled throttle body service, this unit is manufactured to Kia OEM specifications for precise throttle response and long-term reliability. The die-cast aluminum housing and Viton throttle body gasket seals ensure airtight fitment with no wiring modification required. Please verify your OE number before ordering.
- OEM-Grade Throttle Body Assembly – Direct replacement; resolves issues that throttle body cleaning alone cannot fix.
- Kia Kappa Engine Optimized – Engineered for Picanto/Morning 1.0L–1.2L Kappa MPI platforms.
- Dual Redundant TPS (Throttle Body TPS Sensor) – Prevents idle fluctuations and false error codes caused by a faulty throttle body position sensor.
- Viton Gasket & Seals – Oil-resistant fluorine rubber for long-term airtight fitment.
- 100% Factory Tested – Full throttle body actuator stroke and response calibration before shipment.
- Connector: 6-Pin (Hyundai/Kia Kappa Standard)
- Engine: 1.0L / 1.2L Kappa MPI (G3LA / G4LA)
- Housing: Die-Cast Aluminum Alloy
- Seal / Gasket: Viton
- OE Ref: 35100-04220 / 35100-04200
- Warranty: 12 / 24 Months
Installation must be performed by a professional. After fitting, a throttle body relearn procedure is required to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for Kia Kappa platforms. Disconnect the negative battery terminal for 5 minutes before installation. Install a new throttle body gasket (sold separately) and torque bolts to the manufacturer’s specification. Reconnect battery, turn ignition ON for 10 seconds, then OFF for 10 seconds. Start engine and idle for 5 minutes without touching the accelerator. Use Kia KDS or compatible OBD-II scanner to perform “Throttle Body Adaptation” or “ETC Learn” if issues persist. Non-professionals should not attempt installation, as improper fitting may result in throttle body malfunction. The instruction manual included in the package is for professional reference only.
Confirm your vehicle model matches the listing.
Compare product photos with your original throttle body assembly.
Locate the original part number (OE) on your component — look for 35100-04220 or 35100-04200.
Contact us with your part number if unsure — our team can assist with throttle body sensor replacement compatibility and fitment questions.
Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer’s reasons, the buyer will be fully responsible, and refunds will not be provided.