Electronic Throttle Body For Hyundai Santa Fe 2010-2012, Kia Sorento 2011-2013, Sedona 2011-2014, Azera 2010-2011 3.5L V6 – OE351003C700 / 35100-3C700 – LOREADA

OE Numbers: 351003C700 / 35100-3C700 | Direct OEM Replacement

Aftermarket Part Interchanges: TB1056, 67-6019, 6E-9008 | 12+24 Month Warranty | 100% Factory Tested

Vehicle Fitment – Compatible with:

⚠️ Important: This throttle body is designed for 3.5L and 3.8L V6 engines. Please verify your original OE number before ordering. Variations exist between model years, engine codes (Lambda), and market specifications. While the 78mm option is common, confirm bore size with your original part-.

OE Cross Reference – Match with your original part:

351003C700 , 35100-3C700 , 6E-9008 (Cardone) , TB1056 , 67-6019

ℹ️ This throttle body is also compatible with aftermarket brands such as INFINAUTO, A-Premium, and others that reference these same OE numbers.-

Technical Specifications

ℹ️ *The 78mm throttle body is designed for 3.5L/3.8L Lambda engines to provide optimal airflow for the naturally aspirated V6.*

Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring modification required.
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
✅ Lambda Engine Optimized – Specifically engineered for Hyundai/Kia 3.5L/3.8L V6 Lambda engines, ensuring proper air/fuel mixture for smooth idle and optimal power delivery.
✅ Trusted Replacement – Known cross-references to Cardone 6E-9008, ensuring compatibility and reliability

Common Symptoms of a Failing Throttle Body

• Unstable idle, "hunting," or engine stalling at stops

• Hesitation or flat spot during acceleration

• Check Engine Light (CEL) – common DTCs: P2118, P2119, P2101, P2120, P2122, P2135

• Cruise control malfunction or inoperability

• Reduced power / limp mode

• Poor fuel economy

These symptoms are frequently reported for high-mileage Hyundai/Kia vehicles when the throttle body components wear out.

Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Hyundai/Kia Lambda engines, a throttle self-learning / idle relearn procedure is REQUIRED.

For Hyundai/Kia 3.5L/3.8L V6: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Hyundai GDS / Kia KDS) to perform a "Throttle Body Adaptation" or "ETC Learn". Some models may require manual idle relearn using accelerator pedal sequences – refer to your vehicle service manual.

Packing List

• Electronic Throttle Body Unit (78mm bore) × 1

• Installation Gasket / Seal (if applicable) × 1

• Warranty Card / Quality Certificate × 1

• (Optional: Screws / Connector protector – may vary by batch)

How to Ensure You Get the Correct Part

1. Confirm your vehicle is a Hyundai Santa Fe (2010-2012), Kia Sorento (2011-2013), Kia Sedona (2011-2014), or Hyundai Azera (2010-2011) with 3.5L or 3.8L V6 engine.

2. Check your original part number on the existing throttle body.

3. Match your OE number with 351003C700 or our cross-reference list (6E-9008, TB1056, 67-6019).

4. Contact us with your VIN or a photo of your original part if unsure.

After-Sales & Disclaimer

• Pre-installation check: Inspect the throttle body for any defects. Verify the OE number before installation.

• Compatibility: Due to variations between model years, engine codes (Lambda vs other), and market specifications, please confirm fitment before purchasing. This part is for gasoline engines only.

• Warranty: This product carries a 12-month warranty against manufacturing defects. The motor and sensors are covered for 24 months.

🛠️ Quick Reference Card (for Print/Inclusion)