Product Information
Explore detailed specifications and features
OE Numbers: 3510026860 / 35100-26860 / V53810006 / V53-81-0006
Bore Diameter: 53mm | Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
| Make | Model / Chassis | Engine | Years | Notes |
|---|---|---|---|---|
| Hyundai | Accent III (MC) | 1.4L MPI (G4EE) / 1.6L MPI (G4ED) | 2005 – 2010 | Hatchback / Sedan |
⚠️ Important: This throttle body is designed for the 1.4L and 1.6L naturally aspirated petrol engines in the Hyundai Accent III (MC generation). Please verify your original OE number before ordering. Not compatible with 1.5L CRDi diesel, 1.1L, or later Accent generations (RB) without verification. The 53mm bore is the factory specification for this application.
ℹ️ OE Note:
3510026860is the genuine Hyundai / Kia OE number.35100-26860is the hyphenated format.V53810006andV53-81-0006are manufacturer (likely Visteon / Delphi) reference numbers. All refer to the same 53mm throttle body assembly for the MC Accent.
OE Cross Reference – Match with your original part:
| Type | Part Number(s) |
|---|---|
| Hyundai Main |
3510026860, 35100-26860
|
| Manufacturer |
V53810006, V53-81-0006
|
| Aftermarket Cross |
977-046 (Dorman), TB1025, S20056, ETB0047
|
ℹ️ *Hyundai/Kia genuine part number 35100-26860 is the correct OE replacement. Dorman 977‑046 is a direct OE‑spec aftermarket equivalent.*
Technical Specifications
| Parameter | Specification |
|---|---|
| Design | 100% OEM specification – direct replacement |
| Product Type | Electronic Throttle Body (ETB) / Drive-by-Wire |
| Throttle Bore Diameter | 53 mm |
| Connector Type | 6-Pin (Rectangular / Oval – Hyundai standard) |
| Connector Pins | 6 |
| Mounting Hole Quantity | 4 |
| Housing Material | Die-cast Aluminum Alloy + Anti-corrosion Surface Treatment |
| Butterfly Valve Material | Stainless Steel |
| Seal Material | Oil-resistant Fluorine Rubber (Viton) |
| Throttle Position Sensor | Integrated (Dual Redundant) |
| Gasket Included | No (purchase separately) |
| Voltage | 12V |
| Fuel Type | Petrol / Gasoline (MPI – Multi-Point Injection) |
| Engine Family | Hyundai Alpha / Gamma (G4EE / G4ED) |
| Warranty | 12 months (general) / 24 months (motor & sensors) |
ℹ️ The 53mm throttle body is calibrated for Hyundai 1.4L and 1.6L MPI engines. The 6‑pin connector is standard for this generation.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring modification required. Matches Hyundai OE number 35100-26860.
✅ 53mm Precision Bore – Factory‑correct diameter ensures optimal airflow for 1.4L and 1.6L Accent engines, delivering smooth power delivery and stable idle.
✅ Accent III (MC) Optimised – Specifically engineered for Hyundai Accent III (MC) 2005‑2010 with 1.4L G4EE or 1.6L G4ED petrol engines.
✅ Plug & Play Installation – Exact match in dimensions, 6‑pin connector pinouts, and 4‑bolt mounting pattern. Uses factory gasket (sold separately).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control, smooth acceleration, and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes (common DTCs: P0638, P0697, P2100, P2119, P2135).
✅ Rigorous Testing – 100% factory‑tested for thermal cycling, airtightness, and full‑stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
✅ Cost‑Effective OE Alternative – OE‑quality replacement at a competitive price, with no core charge.
✅ 100% New Construction – Complete assembly with integrated TPS – not remanufactured, no core charge required.
✅ Dorman Enhanced Design – Dorman 977‑046 features improved internal components for extended service life.
Common Symptoms of a Failing Throttle Body (Hyundai Accent III 1.4L / 1.6L)
-
Unstable idle, “hunting,” or engine stalling at stops
-
Hesitation or flat spot during acceleration
-
Check Engine Light (CEL) – common DTCs: P0638, P0697, P2100, P2101, P2119, P2135
-
Poor throttle response / delayed acceleration
-
Reduced power / limp mode
-
Electronic throttle control light illuminated on dashboard
-
Cruise control malfunction (if equipped)
-
Rough idle that improves when throttle is applied
-
Engine dies when coming to a stop
-
Poor fuel economy
These symptoms are frequently reported for higher‑mileage Accent III vehicles when the throttle body components wear out or carbon buildup occurs.
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Hyundai Accent III, a throttle self-learning / idle relearn procedure is REQUIRED. Failure to perform the relearn may result in unstable idle or check engine lights.
| Step | Action |
|---|---|
| 1 | Disconnect the negative battery terminal for 5–10 minutes (clears old learned values). |
| 2 | Remove the air intake duct and disconnect the electrical connector (6‑pin). |
| 3 | Remove any coolant hoses attached to the throttle body (if equipped with throttle body heating). |
| 4 | Remove the four mounting bolts and old throttle body. |
| 5 | Discard the old gasket and clean the mating surface on the intake manifold. |
| 6 | Install a new gasket (strongly recommended – sold separately). |
| 7 | Install the new throttle body. Torque bolts to 8–10 Nm (6–7 lb-ft). |
| 8 | Reconnect coolant hoses (if equipped), electrical connector, and air intake duct. |
| 9 | Reconnect the battery. |
| 10 | Turn ignition ON (do not start engine) and wait 10 seconds. |
| 11 | Turn ignition OFF for 10 seconds. |
| 12 | Start the engine and let it idle for 5 minutes (do not touch accelerator). |
| 13 | Turn engine off for 30 seconds, then restart and drive normally. The ECU will complete the adaptation automatically. |
For Hyundai Accent III (MC) 1.4L / 1.6L: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Hyundai GDS) to perform a “Throttle Body Adaptation” or “ETC Learn”. After replacement, it may take a few drive cycles for the ECU to fully adapt. A relearn calibration procedure is mandatory after installation – do not skip this step.
Packing List
-
Electronic Throttle Body Unit (53mm bore, complete assembly with TPS and motor) × 1
-
(Gasket not included – purchase separately)
-
Warranty Card / Certificate of Quality × 1
-
(Installation hardware not included)
How to Ensure You Get the Correct Part
-
Confirm your vehicle is a Hyundai Accent III (MC generation) manufactured between 2005 and 2010.
-
Check your engine is the 1.4L (G4EE) or 1.6L (G4ED) MPI petrol engine. Not compatible with 1.5L CRDi diesel or 1.1L petrol.
-
Locate the original part number on your existing throttle body – look for
3510026860,35100-26860, orV53810006. -
Verify the connector has 6 pins (Hyundai standard for this generation).
-
Measure or confirm the throttle bore diameter is 53mm.
-
Check the mounting bolt pattern (4 bolts) and air intake duct connection match the product photos.
-
Note that a new mounting gasket is not included and must be purchased separately.
-
Contact us with your VIN or a photo of your original part if unsure.
⚠️ Important: This throttle body is for Hyundai Accent III (MC) 1.4L / 1.6L petrol engines ONLY. It will NOT fit:
Accent III diesel (1.5L CRDi) – different throttle body
Accent RB (2011‑2017) – different generation, verify OE number
Kia Rio (JB / UB) – may use different calibration, check OE number
Any other Hyundai/Kia models without verification
After-Sales & Disclaimer
-
Pre-installation check: Inspect the throttle body for any defects. Verify the OE number and connector type (6‑pin) before installation.
-
Gasket requirement: A new mounting gasket is strongly recommended – gasket not included. A damaged or reused gasket may cause rough idle or check engine lights.
-
Relearn requirement: A throttle relearn calibration procedure is mandatory after installation. Failure to perform the relearn may result in unstable idle or drivability issues.
-
Professional installation recommended: While installation is straightforward, proper adaptation is critical. If you are not comfortable performing the relearn procedure, professional installation is recommended.
-
Warranty: This product carries a 12‑month warranty against manufacturing defects. The motor and sensors are covered for 24 months.
OE Numbers: 3510026860 / 35100-26860 / V53810006 / V53-81-0006
Bore Diameter: 53mm | Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
| Make | Model / Chassis | Engine | Years | Notes |
|---|---|---|---|---|
| Hyundai | Accent III (MC) | 1.4L MPI (G4EE) / 1.6L MPI (G4ED) | 2005 – 2010 | Hatchback / Sedan |
⚠️ Important: This throttle body is designed for the 1.4L and 1.6L naturally aspirated petrol engines in the Hyundai Accent III (MC generation). Please verify your original OE number before ordering. Not compatible with 1.5L CRDi diesel, 1.1L, or later Accent generations (RB) without verification. The 53mm bore is the factory specification for this application.
ℹ️ OE Note:
3510026860is the genuine Hyundai / Kia OE number.35100-26860is the hyphenated format.V53810006andV53-81-0006are manufacturer (likely Visteon / Delphi) reference numbers. All refer to the same 53mm throttle body assembly for the MC Accent.
OE Cross Reference – Match with your original part:
| Type | Part Number(s) |
|---|---|
| Hyundai Main |
3510026860, 35100-26860
|
| Manufacturer |
V53810006, V53-81-0006
|
| Aftermarket Cross |
977-046 (Dorman), TB1025, S20056, ETB0047
|
ℹ️ *Hyundai/Kia genuine part number 35100-26860 is the correct OE replacement. Dorman 977‑046 is a direct OE‑spec aftermarket equivalent.*
Technical Specifications
| Parameter | Specification |
|---|---|
| Design | 100% OEM specification – direct replacement |
| Product Type | Electronic Throttle Body (ETB) / Drive-by-Wire |
| Throttle Bore Diameter | 53 mm |
| Connector Type | 6-Pin (Rectangular / Oval – Hyundai standard) |
| Connector Pins | 6 |
| Mounting Hole Quantity | 4 |
| Housing Material | Die-cast Aluminum Alloy + Anti-corrosion Surface Treatment |
| Butterfly Valve Material | Stainless Steel |
| Seal Material | Oil-resistant Fluorine Rubber (Viton) |
| Throttle Position Sensor | Integrated (Dual Redundant) |
| Gasket Included | No (purchase separately) |
| Voltage | 12V |
| Fuel Type | Petrol / Gasoline (MPI – Multi-Point Injection) |
| Engine Family | Hyundai Alpha / Gamma (G4EE / G4ED) |
| Warranty | 12 months (general) / 24 months (motor & sensors) |
ℹ️ The 53mm throttle body is calibrated for Hyundai 1.4L and 1.6L MPI engines. The 6‑pin connector is standard for this generation.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring modification required. Matches Hyundai OE number 35100-26860.
✅ 53mm Precision Bore – Factory‑correct diameter ensures optimal airflow for 1.4L and 1.6L Accent engines, delivering smooth power delivery and stable idle.
✅ Accent III (MC) Optimised – Specifically engineered for Hyundai Accent III (MC) 2005‑2010 with 1.4L G4EE or 1.6L G4ED petrol engines.
✅ Plug & Play Installation – Exact match in dimensions, 6‑pin connector pinouts, and 4‑bolt mounting pattern. Uses factory gasket (sold separately).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control, smooth acceleration, and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes (common DTCs: P0638, P0697, P2100, P2119, P2135).
✅ Rigorous Testing – 100% factory‑tested for thermal cycling, airtightness, and full‑stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
✅ Cost‑Effective OE Alternative – OE‑quality replacement at a competitive price, with no core charge.
✅ 100% New Construction – Complete assembly with integrated TPS – not remanufactured, no core charge required.
✅ Dorman Enhanced Design – Dorman 977‑046 features improved internal components for extended service life.
Common Symptoms of a Failing Throttle Body (Hyundai Accent III 1.4L / 1.6L)
-
Unstable idle, “hunting,” or engine stalling at stops
-
Hesitation or flat spot during acceleration
-
Check Engine Light (CEL) – common DTCs: P0638, P0697, P2100, P2101, P2119, P2135
-
Poor throttle response / delayed acceleration
-
Reduced power / limp mode
-
Electronic throttle control light illuminated on dashboard
-
Cruise control malfunction (if equipped)
-
Rough idle that improves when throttle is applied
-
Engine dies when coming to a stop
-
Poor fuel economy
These symptoms are frequently reported for higher‑mileage Accent III vehicles when the throttle body components wear out or carbon buildup occurs.
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Hyundai Accent III, a throttle self-learning / idle relearn procedure is REQUIRED. Failure to perform the relearn may result in unstable idle or check engine lights.
| Step | Action |
|---|---|
| 1 | Disconnect the negative battery terminal for 5–10 minutes (clears old learned values). |
| 2 | Remove the air intake duct and disconnect the electrical connector (6‑pin). |
| 3 | Remove any coolant hoses attached to the throttle body (if equipped with throttle body heating). |
| 4 | Remove the four mounting bolts and old throttle body. |
| 5 | Discard the old gasket and clean the mating surface on the intake manifold. |
| 6 | Install a new gasket (strongly recommended – sold separately). |
| 7 | Install the new throttle body. Torque bolts to 8–10 Nm (6–7 lb-ft). |
| 8 | Reconnect coolant hoses (if equipped), electrical connector, and air intake duct. |
| 9 | Reconnect the battery. |
| 10 | Turn ignition ON (do not start engine) and wait 10 seconds. |
| 11 | Turn ignition OFF for 10 seconds. |
| 12 | Start the engine and let it idle for 5 minutes (do not touch accelerator). |
| 13 | Turn engine off for 30 seconds, then restart and drive normally. The ECU will complete the adaptation automatically. |
For Hyundai Accent III (MC) 1.4L / 1.6L: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Hyundai GDS) to perform a “Throttle Body Adaptation” or “ETC Learn”. After replacement, it may take a few drive cycles for the ECU to fully adapt. A relearn calibration procedure is mandatory after installation – do not skip this step.
Packing List
-
Electronic Throttle Body Unit (53mm bore, complete assembly with TPS and motor) × 1
-
(Gasket not included – purchase separately)
-
Warranty Card / Certificate of Quality × 1
-
(Installation hardware not included)
How to Ensure You Get the Correct Part
-
Confirm your vehicle is a Hyundai Accent III (MC generation) manufactured between 2005 and 2010.
-
Check your engine is the 1.4L (G4EE) or 1.6L (G4ED) MPI petrol engine. Not compatible with 1.5L CRDi diesel or 1.1L petrol.
-
Locate the original part number on your existing throttle body – look for
3510026860,35100-26860, orV53810006. -
Verify the connector has 6 pins (Hyundai standard for this generation).
-
Measure or confirm the throttle bore diameter is 53mm.
-
Check the mounting bolt pattern (4 bolts) and air intake duct connection match the product photos.
-
Note that a new mounting gasket is not included and must be purchased separately.
-
Contact us with your VIN or a photo of your original part if unsure.
⚠️ Important: This throttle body is for Hyundai Accent III (MC) 1.4L / 1.6L petrol engines ONLY. It will NOT fit:
Accent III diesel (1.5L CRDi) – different throttle body
Accent RB (2011‑2017) – different generation, verify OE number
Kia Rio (JB / UB) – may use different calibration, check OE number
Any other Hyundai/Kia models without verification
After-Sales & Disclaimer
-
Pre-installation check: Inspect the throttle body for any defects. Verify the OE number and connector type (6‑pin) before installation.
-
Gasket requirement: A new mounting gasket is strongly recommended – gasket not included. A damaged or reused gasket may cause rough idle or check engine lights.
-
Relearn requirement: A throttle relearn calibration procedure is mandatory after installation. Failure to perform the relearn may result in unstable idle or drivability issues.
-
Professional installation recommended: While installation is straightforward, proper adaptation is critical. If you are not comfortable performing the relearn procedure, professional installation is recommended.
-
Warranty: This product carries a 12‑month warranty against manufacturing defects. The motor and sensors are covered for 24 months.