Electronic Throttle Body For Chery A1 / QQ6 / V5 – 44mm – Throttle Body Replacement – OE F01R00Y002 – LOREADA

For electronic drive-by-wire systems only – not compatible with mechanical cable throttle. Always verify OE number and engine code before ordering.

This 44mm electronic throttle body is a direct throttle body replacement for Chery, Brilliance, JAC, Zotye, Changan, and Mitsubishi Colt models with 1.3L–1.6L naturally aspirated petrol engines (Mitsubishi 4A90 / 4A91 / 4G15 / 4G18 family). Equipped with an integrated throttle body position sensor (dual redundant TPS), manufactured to Bosch / Chery OEM specifications for precise throttle response and long-term reliability.

• Throttle Body Replacement – OEM Quality – Manufactured to Bosch / Chery OEM specifications. Direct plug-and-play throttle body replacement – no wiring modifications required.
• Throttle Body Position Sensor – Dual Redundant TPS – Integrated throttle body position sensor and actuator motor prevent idle fluctuations, hunting, and false error codes.
• Throttle Body Assembly – Complete Unit – Full throttle body assembly with 44mm precision bore, die-cast aluminum housing, stainless steel butterfly valve, and Viton seals.
• Throttle Body Gasket – Compatibility Note – New intake throttle body gasket strongly recommended (sold separately). Ensure a leak-free seal on every throttle body replacement.
• 100% Factory Tested – Thermal cycling, airtightness, and full-stroke angle calibration before shipment.
• Wide Cross-Reference – Matches F01R00Y002, F01R00Y010, 0280750199, S111129010, 3765010P01, MW251078, and numerous aftermarket references.

• Bore Size: 44mm | Connector: 6-Pin Rectangular (Bosch) | Voltage: 12V
• Engine: 1.3L / 1.5L / 1.6L (4A90 / 4A91 / 4G15 / 4G18 / SQR477F)
• Housing: Die-Cast Aluminum Alloy | Seal: Viton
• OE Ref: F01R00Y002 / 0280750199 / S111129010 / 3765010P01
• Warranty: 12 / 24 Months

Installation must be performed by a professional. After fitting, a throttle body relearn procedure is required to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for 4A91 / 4A90 platforms. Non-professionals should not attempt installation, as improper fitting may result in throttle body malfunction. The instruction manual included in the package is for professional reference only.

Confirm your vehicle model matches the listing.
Compare product photos with your original part.
Locate the original part number (OE) on your component.
Match this number with ours. Contact us with your part number if unsure.

Common throttle body symptoms on 4A91 / 4A90 engines include rough idle, hesitation on acceleration, unstable RPM at startup, and engine fault codes. If basic throttle body cleaning with throttle body cleaner spray has not resolved the issue, a full throttle body replacement is typically the next step.

This throttle body assembly includes an integrated throttle body position sensor – no separate sensor purchase required. A replacement throttle body gasket is strongly recommended and sold separately.

Compared to dealer throttle body repair cost, this direct OEM-quality unit offers significant savings while maintaining factory performance standards. Fits Chery A1, QQ6, V3, V5, V6 Cross, Brilliance FRV/FSV/H530/V5, JAC J2/J3, Zotye Z200/T200, Changan Benni/CX20/Alsvin, and Mitsubishi Colt Z30 with 1.3L–1.6L 4A9/4G1 family engines.

Note: Throttle body adaptation via Launch X431 or compatible scanner is required after installation. The throttle body gasket is sold separately.

Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer's reasons, the buyer will be fully responsible, and refunds will not be provided.