Product Information
Explore detailed specifications and features
| Item | Detail |
|---|---|
| Product Name | Electronic Throttle Body Assembly (ETB) |
| Bore Diameter | 60mm |
| Connector | 6-Pin Blade Terminal |
| Housing Material | Die-Cast Aluminum Alloy |
| Seal Material | Viton (Oil-Resistant Fluorine Rubber) |
| OE Numbers | MN135985 / MN-135985 / S20213 / ETB0108 |
| Warranty | 12 / 24 Months |
| Make | Model | Engine |
|---|---|---|
| Mitsubishi | Eclipse 4G (2006–2012) | 2.4L L4 (4G69) |
| Mitsubishi | Galant 9G (2004–2012) | 2.4L L4 (4G69) |
| Mitsubishi | Lancer CS (2004–2006) | 2.4L L4 SOHC |
| Mitsubishi | Outlander CU (2004–2006) | 2.4L L4 (4G69) |
Note: Not compatible with 3.8L V6, 2.0L turbo, or diesel variants. Always verify OE number before ordering.
This OEM-grade 60mm electronic throttle body assembly is a direct throttle body replacement for Mitsubishi Eclipse, Galant, Lancer, and Outlander with 2.4L naturally aspirated 4G69 engines. Whether you need a full throttle body replacement after throttle body actuator failure, a throttle body tps sensor fault, or a scheduled throttle body service, this unit is built to Hitachi/Mitsubishi OEM specifications for precise throttle response and long-term reliability. The die-cast aluminum housing and Viton throttle body gasket seals ensure airtight fitment with no wiring modification required. Please verify your OE number before ordering.
- OEM-Grade Throttle Body Assembly – Hitachi OEM specification; resolves issues that throttle body cleaning alone cannot fix.
- 60mm Precision Bore – Factory-correct diameter for Mitsubishi 2.4L 4G69 engines.
- 6-Pin Blade Terminal Connector – Plug-and-play fitment for Mitsubishi wiring harness.
- Dual Redundant TPS (Throttle Body TPS Sensor) – Prevents idle fluctuations, hunting, and false error codes caused by a faulty throttle body position sensor.
- Viton Gasket & Seals – Oil-resistant fluorine rubber for long-term airtight fitment.
- 100% Factory Tested – Full throttle body actuator stroke and response calibration before shipment.
- Bore Size: 60mm
- Connector: 6-Pin Blade Terminal
- OE Ref: MN135985 / MN-135985 / S20213 / ETB0108
- Housing: Die-Cast Aluminum Alloy
- Seal / Gasket: Viton
- Warranty: 12 / 24 Months
A throttle body relearn procedure is required after installation to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for Mitsubishi 4G69 platforms. Disconnect battery for 5–10 minutes before installation. Install a new throttle body gasket (sold separately). Reconnect battery, turn ignition ON for 10 seconds, then OFF for 10 seconds. Start engine and idle for 5 minutes without touching the accelerator. Use Mitsubishi MUT-III or compatible OBD scanner to perform throttle position initialisation if issues persist. Non-professionals should not attempt installation.
Confirm your vehicle model matches the listing.
Compare product photos with your original throttle body assembly.
Locate the original part number (OE) on your component.
Match this number with ours. Contact us with your part number if unsure — our team can assist with throttle body sensor replacement compatibility and fitment questions.
Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer’s reasons, the buyer will be fully responsible, and refunds will not be provided.
| Item | Detail |
|---|---|
| Product Name | Electronic Throttle Body Assembly (ETB) |
| Bore Diameter | 60mm |
| Connector | 6-Pin Blade Terminal |
| Housing Material | Die-Cast Aluminum Alloy |
| Seal Material | Viton (Oil-Resistant Fluorine Rubber) |
| OE Numbers | MN135985 / MN-135985 / S20213 / ETB0108 |
| Warranty | 12 / 24 Months |
| Make | Model | Engine |
|---|---|---|
| Mitsubishi | Eclipse 4G (2006–2012) | 2.4L L4 (4G69) |
| Mitsubishi | Galant 9G (2004–2012) | 2.4L L4 (4G69) |
| Mitsubishi | Lancer CS (2004–2006) | 2.4L L4 SOHC |
| Mitsubishi | Outlander CU (2004–2006) | 2.4L L4 (4G69) |
Note: Not compatible with 3.8L V6, 2.0L turbo, or diesel variants. Always verify OE number before ordering.
This OEM-grade 60mm electronic throttle body assembly is a direct throttle body replacement for Mitsubishi Eclipse, Galant, Lancer, and Outlander with 2.4L naturally aspirated 4G69 engines. Whether you need a full throttle body replacement after throttle body actuator failure, a throttle body tps sensor fault, or a scheduled throttle body service, this unit is built to Hitachi/Mitsubishi OEM specifications for precise throttle response and long-term reliability. The die-cast aluminum housing and Viton throttle body gasket seals ensure airtight fitment with no wiring modification required. Please verify your OE number before ordering.
- OEM-Grade Throttle Body Assembly – Hitachi OEM specification; resolves issues that throttle body cleaning alone cannot fix.
- 60mm Precision Bore – Factory-correct diameter for Mitsubishi 2.4L 4G69 engines.
- 6-Pin Blade Terminal Connector – Plug-and-play fitment for Mitsubishi wiring harness.
- Dual Redundant TPS (Throttle Body TPS Sensor) – Prevents idle fluctuations, hunting, and false error codes caused by a faulty throttle body position sensor.
- Viton Gasket & Seals – Oil-resistant fluorine rubber for long-term airtight fitment.
- 100% Factory Tested – Full throttle body actuator stroke and response calibration before shipment.
- Bore Size: 60mm
- Connector: 6-Pin Blade Terminal
- OE Ref: MN135985 / MN-135985 / S20213 / ETB0108
- Housing: Die-Cast Aluminum Alloy
- Seal / Gasket: Viton
- Warranty: 12 / 24 Months
A throttle body relearn procedure is required after installation to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for Mitsubishi 4G69 platforms. Disconnect battery for 5–10 minutes before installation. Install a new throttle body gasket (sold separately). Reconnect battery, turn ignition ON for 10 seconds, then OFF for 10 seconds. Start engine and idle for 5 minutes without touching the accelerator. Use Mitsubishi MUT-III or compatible OBD scanner to perform throttle position initialisation if issues persist. Non-professionals should not attempt installation.
Confirm your vehicle model matches the listing.
Compare product photos with your original throttle body assembly.
Locate the original part number (OE) on your component.
Match this number with ours. Contact us with your part number if unsure — our team can assist with throttle body sensor replacement compatibility and fitment questions.
Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer’s reasons, the buyer will be fully responsible, and refunds will not be provided.