Electronic Throttle Body For Fiat Punto Panda 500 Bravo Stilo, Lancia Ypsilon, Ford Ka – 40mm – OE0280750149 – LOREADA

OE Numbers: 0280750149 / 0 280 750 149

Direct OEM Replacement (Bosch) | 12+24 Month Warranty | 100% Factory Tested

Vehicle Fitment – Compatible with:

⚠️ Important: This throttle body is designed for BMW vehicles equipped with the M54 6-cylinder naturally aspirated engine (M54B25 / M54B30). Please verify your original OE number before ordering. Not compatible with M52, M56, or N52 engines.

OE Cross Reference – Match with your original part:

ℹ️ Bosch is the original equipment manufacturer for this throttle body.

Technical Specifications

ℹ️ The throttle body is a complete assembly including throttle valve, actuator motor, and dual throttle position sensors. Not serviceable separately.

Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring modification required.
✅ Genuine Bosch Quality – Manufactured by Bosch, the original equipment supplier for BMW.
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
✅ M54 Engine Optimized – Specifically calibrated for BMW M54 engines, ensuring smooth idle and optimal power delivery.
✅ Plug & Play – Exact match in dimensions, connector pinouts, and mounting pattern.

Common Symptoms of a Failing Throttle Body (BMW M54)

• Unstable idle, "hunting," or engine stalling at stops

• Hesitation or flat spot during acceleration

• Check Engine Light (CEL) – common DTCs: P0120, P0124, P0220, P0222, P2100, P2119, P2135

• Poor throttle response / delayed acceleration

• Reduced power / limp mode

• Cruise control malfunction (if equipped)

*These symptoms are frequently reported for high-mileage E46, E39, E53, and Z4 vehicles when the throttle body components wear out.*

Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body (ETB) on BMW M54 engines, a throttle self-learning / idle relearn procedure is REQUIRED.

For BMW M54: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., BMW ISTA / INPA) to perform "Throttle Body Adaptation" (EDK adaptation). Some models may require a "DME reset" after installation.

Packing List

• Electronic Throttle Body Unit (Bosch OEM quality) × 1

• Installation Gasket / Seal (if applicable) × 1

• Warranty Card / Quality Certificate × 1

• (Optional: Screws / Connector protector – may vary by batch)

How to Ensure You Get the Correct Part

1. Confirm your vehicle is a BMW with the M54 6-cylinder engine (E46 325i/330i, E39 525i/530i, E53 X5 3.0i, Z4 3.0i).

2. Check your original part number on the existing throttle body.

3. Match your OE number with 0280750149 or 0 280 750 149.

4. Verify the connector has 6 pins (Bosch standard for this application).

5. Contact us with your VIN or a photo of your original part if unsure.

After-Sales & Disclaimer

• Pre-installation check: Inspect the throttle body for any defects. Verify the OE number and connector type (6-pin) before installation.

• Compatibility: This throttle body is for M54 naturally aspirated petrol engines ONLY. It will NOT fit M52, M56, N52, or diesel engines.

• Gasket requirement: A new mounting gasket is strongly recommended for proper sealing.

• Warranty: This product carries a 12-month warranty against manufacturing defects. The motor and sensors are covered for 24 months.

🛠️ Quick Reference Card