Electronic Throttle Body For Nissan Versa 2013-2018 & Kicks 2017 – OE161193AB0D – LOREADA

OE Numbers: 5RA5001 / 161193AB0D / 3AA5001 / 161193AB1D

Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested

Vehicle Fitment – Compatible with:

⚠️ Important: This throttle body is designed for the 1.6L HR16DE naturally aspirated engine found in Nissan Versa and Kicks. Please verify your original OE number before ordering. Versa Note 2014–2019 uses the same HR16DE engine platform. Variations exist between model years and market specifications. This part is not compatible with Versa 1.8L (MR18DE) engines.

ℹ️ OE Note: Nissan OE part numbers follow the pattern 16119-3AB0D (with hyphen). The listing numbers 161193AB0D, 161193AB1D are valid interchange numbers for the same throttle body assembly. 5RA5001 and 3AA5001 are aftermarket or alternative supplier references for this application. All reference numbers listed correspond to the same OE specification for 1.6L Versa/Kicks engines.

OE Cross Reference – Match with your original part:

ℹ️ *OE-grade throttle bodies are manufactured to exact OEM dimensions, connector pinouts, and electrical parameters. The OE specification 6-pin connector is the standard configuration for Nissan HR16DE applications.*

Technical Specifications

ℹ️ The throttle body controls the amount of air entering the engine based on accelerator pedal position. The ECM operates the throttle control motor, which opens and closes the throttle valve. Current opening angle is detected by dual throttle position sensors for redundant signal monitoring.-

Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring modification or splicing required.
✅ Plug & Play Installation – Exact match in dimensions, connector pinouts (6-pin), and electrical parameters. Uses factory mounting bolt pattern.
✅ High Performance – Motor response time ≤ 50 ms for precise intake control, smooth acceleration, and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
✅ HR16DE Optimized – Specifically engineered for Nissan 1.6L HR16DE engines (Versa / Kicks / Note), ensuring proper air/fuel mixture for smooth idle and optimal power delivery.
✅ Wide Cross Compatibility – OE-grade replacements are verified against multiple part numbers including TB1186 and TBN-011, ensuring fitment across 2012–2019 Versa and 2014–2019 Versa Note platforms-

Common Symptoms of a Failing Throttle Body (Nissan Versa / Kicks 1.6L)

• Unstable idle, “hunting,” or engine stalling at stops

• Hesitation or flat spot during acceleration

• Check Engine Light (CEL) – common DTCs: P0120, P0122, P0220, P0222, P2100, P2119, P2135

• Poor throttle response / delayed acceleration

• Reduced power / limp mode

• Cruise control malfunction (if equipped)

• Poor fuel economy

These symptoms are frequently reported for high-mileage Versa and Kicks vehicles when the throttle body components wear out.

Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Nissan Versa / Kicks, a throttle self-learning / idle relearn procedure is REQUIRED.

Step-by-Step Procedure (Standard Method):

For Nissan HR16DE: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Nissan Consult III+) to perform a “Throttle Body Adaptation” or “Idle Air Volume Learn”. Some models may require manual idle relearn using accelerator pedal sequences – refer to your vehicle service manual.

Additional Note: The electric throttle control actuator can be visually inspected for foreign matter or damage. The ECM may detect issues with throttle position sensor signal voltage if the throttle body fails-. After replacement, the throttle position sensor does not require separate calibration as it is integrated into the assembly-.

Packing List

• Electronic Throttle Body Unit (complete assembly) × 1

• Installation Gasket / Seal (if applicable) × 1

• Warranty Card / Quality Certificate × 1

• (Optional: Screws / Connector protector – may vary by batch)

How to Ensure You Get the Correct Part

1. Confirm your vehicle is a Nissan Versa (2013–2015, 2017–2018) or Nissan Kicks (2017) with the 1.6L HR16DE engine.

2. Check your original part number on the existing throttle body.

3. Match your OE number with 161193AB0D, 161193AB1D, 5RA5001, 3AA5001, or 16119-3AB0D.

4. Verify the connector has 6 pins (OEM specification for this application).

5. Contact us with your VIN or a photo of your original part if unsure.

⚠️ Important: The Versa 1.8L (MR18DE) engine uses a different throttle body and is NOT compatible with this listing. If your Versa is 2007–2012 with 1.8L, this part will not fit.

After-Sales & Disclaimer

• Pre-installation check: Inspect the throttle body for any defects. Verify the OE number and connector type (6-pin) before installation.

• Compatibility: Due to variations between model years, engine codes (HR16DE vs MR18DE), and market specifications, please confirm fitment before purchasing. This part is for 1.6L naturally aspirated petrol engines ONLY.

• Gasket requirement: A new mounting gasket is strongly recommended for proper sealing and to prevent vacuum leaks.

• Professional installation recommended: While installation is straightforward, proper adaptation is critical. If you are not comfortable performing the relearn procedure, professional installation is recommended.

• Warranty: This product carries a 12-month warranty against manufacturing defects. The motor and sensors are covered for 24 months.

🛠️ Quick Reference Card (for Print/Inclusion)