Throttle Body for HYUNDAI / KIA 1.6L (i30 / K2 / K3) 2013-2015
OE Numbers: 9045020001 / 351002B180
Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
⚠️ Important: This throttle body is designed for 1.6L Gamma petrol engines (MPI or GDI). Please verify your original OE number before ordering. Variations exist between markets (e.g., China vs. global) and ECU calibrations.
OE Cross Reference – Match with your original part:
9045020001 , 351002B180
Also compatible with: 35100-2B180, 90450-20001 (please confirm)
Technical Specifications
ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
Common Symptoms of a Failing Throttle Body
-
Unstable idle, "hunting," or engine stalling
-
Acceleration lag or delayed throttle pedal response
-
Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.
-
Cruise control malfunction or inoperability
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Hyundai/Kia vehicles, a throttle self-learning / idle relearn procedure is required.
For Hyundai/Kia Gamma 1.6L: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Hyundai GDS / Kia KDS) to perform a "Throttle Body Adaptation" or "ETC Learn".
Packing List
-
Electronic Throttle Body Unit × 1
-
Installation Gasket / Seal (if applicable) × 1
-
Warranty Card / Quality Certificate × 1
-
(Optional: Screws / Connector protector – may vary by batch)
How to Ensure You Get the Correct Part
-
Confirm your vehicle is a Hyundai i30 (2013-2015) or Kia K2/K3 (2013-2015) with 1.6L engine.
-
Locate the original part number (OE) on your existing throttle body.
-
Compare product photos with your original part (especially connector shape and bolt pattern).
-
Match your OE number with our list above.
-
Contact us with your VIN or a photo of your original part if unsure.
After-Sales & Disclaimer
-
Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.
-
Compatibility: Due to variations in model years, engine types (MPI vs GDI), and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.
-
Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.
