78mm Electronic Throttle Body Assembly For Hyundai Santa Fe Azera Kia Sorento Sedona 3.5L 3.8L V6 Lambda – OE 351003C700 – LOREADA

Note: For 3.5L and 3.8L V6 Lambda naturally aspirated petrol engines only. Verify OE number before ordering — variations exist between model years and market specifications.

This OEM-grade 78mm electronic throttle body assembly is a direct throttle body replacement for Hyundai Santa Fe, Azera, and Kia Sorento, Sedona with 3.5L/3.8L V6 Lambda naturally aspirated engines (2010–2014). Whether you need a full throttle body replacement after throttle body actuator failure, a throttle body tps sensor fault (P2118, P2119, P2101, P2120, P2135), or a scheduled throttle body service, this unit is engineered to Hyundai/Kia OEM specifications for precise throttle response and long-term reliability. The die-cast aluminum housing and Viton throttle body gasket seals ensure airtight fitment with no wiring modification required. Please verify your OE number before ordering.

• OEM-Grade Throttle Body Assembly – Direct replacement; resolves issues that throttle body cleaning alone cannot fix.
• 78mm Lambda-Optimized Bore – Factory-correct diameter for Hyundai/Kia 3.5L/3.8L V6 Lambda engines.
• 6-Pin Connector – Plug-and-play fitment for Hyundai/Kia Lambda wiring harness.
• Dual Redundant TPS (Throttle Body TPS Sensor) – Prevents idle fluctuations, hunting, and false error codes caused by a faulty throttle body position sensor.
• Viton Gasket & Seals – Oil-resistant fluorine rubber for long-term airtight fitment.
• 100% Factory Tested – Thermal cycling, airtightness, and full throttle body actuator stroke calibration before shipment.
• ISO 16750 Compliant – Meets automotive environmental standards.

• Bore Diameter: 78mm
• Connector: 6-Pin (Hyundai/Kia Lambda Standard)
• Engine: 3.5L / 3.8L V6 Lambda
• Housing: Die-Cast Aluminum Alloy + Anti-Corrosion Treatment
• Butterfly Valve: Stainless Steel
• Seal / Gasket: Viton
• OE Ref: 351003C700 / 35100-3C700
• Aftermarket Cross: TB1056 / 67-6019 / 6E-9008
• Warranty: 12 / 24 Months

Installation must be performed by a professional. After fitting, a throttle body relearn procedure is required to recalibrate the throttle body position sensor baseline — this is standard throttle body service practice for Hyundai/Kia Lambda V6 platforms. Disconnect the negative battery terminal for 5 minutes, install the new throttle body assembly with a fresh throttle body gasket (sold separately), then reconnect battery. Turn ignition ON for 10 seconds, OFF for 10 seconds. Start engine and idle for 5 minutes without touching the accelerator, then turn off for 1 minute and restart. Use Hyundai GDS / Kia KDS or compatible OBD-II scanner to perform “Throttle Body Adaptation” or “ETC Learn” if issues persist. Non-professionals should not attempt installation, as improper fitting may result in throttle body malfunction. The instruction manual included in the package is for professional reference only.

Confirm your vehicle is a Hyundai Santa Fe (2010–2012), Azera (2010–2011), Kia Sorento (2011–2013), or Sedona (2011–2014) with a 3.5L or 3.8L V6 Lambda engine.
Check your original throttle body assembly for part number 351003C700 or cross-references TB1056, 6E-9008, 67-6019.
Verify the connector has 6 pins (Hyundai/Kia Lambda standard).
Contact us with your VIN or a photo of your original part if unsure — our team can assist with throttle body sensor replacement compatibility and fitment questions.

Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer’s reasons, the buyer will be fully responsible, and refunds will not be provided.