Electronic Throttle Body For VW Jetta 1.6L ATK FAW-VW – 52mm – Throttle Body Replacement – OE 06A133062AP / A2C53065244 – LOREADA

For FAW-Volkswagen Jetta with 1.6L ATK engine (Bosch Motronic M7.5.10) only. Not compatible with North American/European Jetta, 1.8L ATK, diesel, or mechanical throttle cable systems. The AP suffix on OE number 06A133062AP is critical – always verify before ordering.

This is a direct OEM throttle body replacement — a 52mm electronic throttle body for FAW-Volkswagen Jetta with 1.6L ATK engine (Bosch Motronic M7.5.10 management), 2000–2005. Built to Bosch/Continental VDO OEM specification (06A133062AP / A2C53065244), it includes an integrated throttle body position sensor (dual non-contact Hall-Effect) for precise throttle response and plug-and-play fitment.

• OEM-Grade Throttle Body Replacement – Bosch/Continental VDO specification; direct drop-in, no wiring modification required.
• Integrated Throttle Body Position Sensor – Dual non-contact Hall-Effect TPS prevents idle fluctuations, hunting, and false error codes (P0638, P2100, P2119, P2135).
• 52mm Precision Bore Throttle Body Assembly – Factory-correct diameter for 1.6L ATK/BJG Bosch Motronic M7.5.10 engines.
• Throttle Body Gasket – New gasket recommended (sold separately); Viton OE-spec seal for airtight fitment.
• 100% Factory Tested – Thermal cycling, airtightness, and full-stroke angle calibration. Operating range: −30°C to +150°C.

• Bore Size: 52mm
• Connector: 6-Pin D-Shape
• Engine: 1.6L ATK / BJG (Bosch Motronic M7.5.10)
• Housing: Die-Cast Aluminum Alloy | Seal: Viton | Voltage: 12V
• Operating Temp: −30°C to +150°C
• OE Ref: 06A133062AP / A2C53065244 / 14233
• Warranty: 12 / 24 Months

Before replacing, perform a throttle body cleaning to rule out carbon buildup as the root cause. If throttle body replacement is required, note that throttle body adaptation is required after installation: for 1.6L 2V ATK (RSH) use VCDS/VAG-COM Basic Settings Group 060; for 1.6L 5V (BJG) use Group 098. Disconnect battery for 5–10 minutes before installation. Fit a new throttle body gasket (sold separately) and torque bolts to 8–10 Nm. Start engine, idle 5 minutes without touching the accelerator, then turn off for 30 seconds and restart. Installation must be performed by a qualified technician.

Confirm your vehicle model matches the listing.
Compare product photos with your original part.
Locate the original part number (OE) on your component – the AP suffix is critical.
Match this number with ours. Contact us with your part number if unsure.

Our price includes only the product and standard shipping. Buyers are responsible for all additional charges (e.g., customs duties, import fees, VAT, insurance). Customs policies vary by country – please check your local import regulations before ordering. If customs clearance fails due to the buyer's reasons, the buyer will be fully responsible, and refunds will not be provided.

Experiencing throttle body symptoms on your FAW-VW Jetta 1.6L ATK — such as rough idle, poor acceleration, stalling, or error codes P0638/P2119? Start with a throttle body cleaning using a quality cleaner spray — if symptoms persist, a full throttle body replacement is the next step. This OEM-spec throttle body assembly includes the throttle body position sensor, eliminating the need for separate throttle body sensor replacement. Note: throttle body gasket is sold separately. Compared to dealer pricing, the throttle body repair cost is significantly reduced with this factory-direct unit. Verify OE suffix AP (06A133062AP) before ordering — a reliable, cost-effective solution for FAW-VW Jetta throttle body issues.