Throttle Body for BMW MINI (R50/R53/R55/R56/R57/R58/R59/R61)
Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
⚠️ Important: This throttle body fits specific MINI/BMW configurations. You must verify your original OE part number before ordering. Due to variations in engine types (e.g., N12, N14, N16, N18), please match your original part.
OE Cross Reference – Please Match Your Original Number
This product is compatible with various OE numbers for MINI R-series vehicles.
Common OE references include (but are not limited to):
A2C59513208/ 13547528179/ A2C33099600/ S20080
TB1120/ V20810019/ 13547576698/ 13547604918
13548624189/ 13548675278
ℹ️ If you are unsure, please contact us with your VIN or a photo of your original part.
Technical Specifications
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
Common Symptoms of a Failing Throttle Body
-
Unstable idle, "hunting," or engine stalling
-
Acceleration lag or delayed throttle pedal response
-
Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.
-
Cruise control malfunction or inoperability
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB), some vehicles require a throttle self-learning or idle relearn procedure
For MINI/BMW: It is highly recommended to perform "Throttle Alignment" using a professional diagnostic scanner (e.g., ISTA, INPA, or generic OBD2 scanner with adaptation function).
Packing List
-
Electronic Throttle Body Unit × 1
-
Installation Gasket / Seal (if applicable) × 1
-
Warranty Card / Quality Certificate × 1
-
(Optional: Screws / Connector protector – may vary by batch)
How to Ensure You Get the Correct Part
-
Locate the original part number (OE) on your existing throttle body.
-
Compare product photos with your original part (especially connector shape and bolt pattern).
-
Match your OE number with our listing or contact us.
-
Provide your VIN (first 8 digits) or a photo of your original part if unsure.
After-Sales & Disclaimer
-
Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.
-
Compatibility: Due to variations in model years, engine types (N12/N14/N16/N18), and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.
-
Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.
