Throttle Body for VW Transporter T5 T6 Amarok & Crafter 2.0 TDi | OE 03L128063S 03L128063H | LOREADA

Throttle Body for VW Transporter / Amarok / Crafter 2.0 TDI CR

OE Numbers: 03L128063S / 03L128063H / A2C59515370 / 7519200 / A2C53385161 / A2C32356700

Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested

Vehicle Fitment – Compatible with:

⚠️ Important: This throttle body (intake air control valve / throttle valve) is designed for 2.0L TDI Common Rail engines (EA189 / EA288). Please verify your original OE number before ordering. Variations exist between model years, power outputs, and emission standards (Euro 5 / Euro 6).

OE Cross Reference – Match with your original part:

03L128063S , 03L128063H , A2C59515370 , 7519200 , A2C53385161 , A2C32356700

Also compatible with: 03L128063F, 03L128063G, 03L128063J, 03L128063K, 03L128063L, 03L128063M, 03L128063N, 03L128063P, 03L128063Q, 03L128063R (please confirm)

Technical Specifications

ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.

Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake air control, improving throttle response and EGR management.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.

Common Symptoms of a Failing Throttle Body (Intake Throttle Valve)

• Unstable idle, "hunting," or engine stalling

• Acceleration lag or delayed pedal response

• Check Engine Light (CEL) – common DTCs: P0638, P0697, P2100, P2119, etc.

• Cruise control malfunction or inoperability

• Reduced power / limp mode

Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body on VW TDI, a throttle self-learning / basic settings procedure is required.

For VW 2.0 TDI CR: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., VCDS / VAG-COM) to perform "Throttle Body Adaptation" (Basic Settings Group 060 or 098 in Engine module).

Packing List

• Electronic Throttle Body Unit × 1

• Installation Gasket / Seal (if applicable) × 1

• Warranty Card / Quality Certificate × 1

• (Optional: Screws / Connector protector – may vary by batch)

How to Ensure You Get the Correct Part

1. Confirm your vehicle is a VW Transporter (T5/T6), Amarok, or Crafter with 2.0 TDI CR or Bi-Turbo engine.

2. Locate the original part number (OE) on your existing throttle body (located on intake pipe/manifold).

3. Compare product photos with your original part (especially connector shape and bolt pattern).

4. Match your OE number with our list above.

5. Contact us with your VIN or a photo of your original part if unsure.

After-Sales & Disclaimer

• Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.

• Compatibility: Due to variations in model years, engine codes (CFCA, CJAA, CKUB, etc.), and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.

• Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.