CHOOSE LOREADA

Throttle Body for VW Audi A4 B5 A6 C5 & Passat B5 1.8T | OE 058133063M 058133063Q 408237212008Z | LOREADA

付款方式
  • American Express
  • Diners Club
  • Discover
  • JCB
  • Maestro
  • Mastercard
  • Visa
  • Visa Electron
$68.27 USD
促销价  $68.27 USD 常规价格 
现货

Customize your product

There are three ways to contact staff for customization:Click on the bottom right corner to contact store customer service Add WhatsApp:+86156161182193. Join WhatsApp VIP group: https://chat.whatsapp.com/GekN9JFLM5YCKdFnVAhTDb

Throttle Body for VW / AUDI 1.8T (A4 / A6 / Passat)

OE Numbers: 058133063Q / 703703170 / V10810055 / 556111 / 408237212008 / 058133063M / 408237212008Z

Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested


Vehicle Fitment – Compatible with:

Make Model / Chassis Engine Notes
Audi A4 (8D2; B5) 1.8L Turbo (AEB, APU, ANB, etc.)
Audi A6 (4B; C5) 1.8L Turbo
Volkswagen Passat (3B2; B5) 1.8L Turbo

⚠️ Important: This throttle body is designed for 1.8L 20V Turbo petrol engines (longitudinal mounting, typically Bosch Motronic). Please verify your original OE number before ordering. Variations exist between model years and ECU versions.


OE Cross Reference – Match with your original part:

058133063Q , 703703170 , V10810055 , 556111 , 408237212008 , 058133063M , 408237212008Z

Also compatible with: 058133063P058133063R (please confirm)


Technical Specifications

Parameter Specification
Design 100% OEM specification – direct replacement
Installation Fit Exact match in dimensions, connector pinouts, and electrical parameters
Connector Type 7-Pin / Square / Oval (VAG 1.8T typically uses 6-pin rectangular – check your original)
Throttle Bore Diameter

56mm (1.8T often uses 60mm or 65mm – confirm with your original)

Housing Material Die-cast Aluminum Alloy + Anti-corrosion Surface Treatment
Butterfly Valve Material Stainless Steel / Anodized Aluminum
Seal Material Oil-resistant Fluorine Rubber (Viton)
Warranty 12 months (general) / 24 months (motor & sensors)

ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.


Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.


Common Symptoms of a Failing Throttle Body

  • Unstable idle, "hunting," or engine stalling

  • Acceleration lag or delayed throttle pedal response

  • Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.

  • Cruise control malfunction or inoperability


Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body (ETB) on VW/Audi 1.8T, a throttle self-learning / idle relearn procedure is required.

Step Action
1 Disconnect the negative battery terminal for 5 minutes (clears old learned values).
2 Install the new throttle body, reconnect the plug and hoses.
3 Turn ignition ON (do not start engine) and wait 10 seconds.
4 Turn ignition OFF for 10 seconds.
5 Start the engine and let it idle until the cooling fan engages – do not press the accelerator during this time.

For Audi/VW 1.8T: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., VCDS / VAG-COM) to perform "Throttle Body Alignment" (Basic Settings Group 098, 060, or 098).


Packing List

  • Electronic Throttle Body Unit × 1

  • Installation Gasket / Seal (if applicable) × 1

  • Warranty Card / Quality Certificate × 1

  • (Optional: Screws / Connector protector – may vary by batch)


How to Ensure You Get the Correct Part

  1. Confirm your vehicle is an Audi A4 (B5), Audi A6 (C5), or VW Passat (B5) with 1.8L Turbo engine.

  2. Locate the original part number (OE) on your existing throttle body.

  3. Compare product photos with your original part (especially connector shape and bolt pattern).

  4. Match your OE number with our list above.

  5. Contact us with your VIN or a photo of your original part if unsure.


After-Sales & Disclaimer

  • Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.

  • Compatibility: Due to variations in model years, engine types (e.g., AEB, APU, ANB, AWL), and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.

  • Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.