Throttle Body for VW / AUDI / SEAT / SKODA 2.0L 20V
OE Numbers: 06B133062S / 06B133062H / 0280750189 / FLAI213N / 11445 / 0280750088 / V10810057
Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
⚠️ Important: This throttle body is designed for 2.0L 20V naturally aspirated petrol engines (VW Group EA113 / EA827 family). Please verify your original OE number before ordering. Variations exist between model years and ECU calibrations.
OE Cross Reference – Match with your original part:
06B133062S , 06B133062H , 0280750189 , FLAI213N , 11445 , 0280750088 , V10810057
Also compatible with: 06B133062J, 06B133062K, 06B133062L, 06B133062M, 06B133062N, 06B133062P, 06B133062Q, 06B133062R (please confirm)
Technical Specifications
ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
Common Symptoms of a Failing Throttle Body
-
Unstable idle, "hunting," or engine stalling
-
Acceleration lag or delayed throttle pedal response
-
Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.
-
Cruise control malfunction or inoperability
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB) on VW/Audi/SEAT/Skoda 2.0L 20V, a throttle self-learning / idle relearn procedure is required.
For VAG 2.0L 20V: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., VCDS / VAG-COM) to perform "Throttle Body Alignment" (Basic Settings Group 098 or 060 in Engine module).
Packing List
-
Electronic Throttle Body Unit × 1
-
Installation Gasket / Seal (if applicable) × 1
-
Warranty Card / Quality Certificate × 1
-
(Optional: Screws / Connector protector – may vary by batch)
How to Ensure You Get the Correct Part
-
Confirm your vehicle is equipped with a 2.0L 20V naturally aspirated engine (check engine code: ALT, BGW, APK, AQN, BTL, BJL, etc.).
-
Locate the original part number (OE) on your existing throttle body.
-
Compare product photos with your original part (especially connector shape and bolt pattern).
-
Match your OE number with our list above.
-
Contact us with your VIN or a photo of your original part if unsure.
After-Sales & Disclaimer
-
Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.
-
Compatibility: Due to variations in model years, engine codes, and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.
-
Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.
