Throttle Body for BMW (E90 / E70 / E71 / E72 / F01-F04 / F07)
OE Numbers: A2C83077100 / A2C53279057 / A2C59514305 / 13547806231
Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
⚠️ Important: This throttle body is designed for BMW 3.0L diesel engines (M57 / N57). Please verify your original OE number before ordering. Variations exist between model years, engine codes, and emission standards (e.g., EU4 / EU5).
OE Cross Reference – Match with your original part:
A2C83077100 , A2C53279057 , A2C59514305 , 13547806231
Also compatible with: 13547807273, 13547795850 (please confirm)
Technical Specifications
ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
Common Symptoms of a Failing Throttle Body
-
Unstable idle, "hunting," or engine stalling
-
Acceleration lag or delayed throttle pedal response
-
Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.
-
Cruise control malfunction or inoperability
-
Reduced power / limp mode
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB) on a BMW, a professional diagnostic scanner is REQUIRED to perform throttle adaptation (also known as "throttle alignment" or "EDK adaptation").
For BMW 3.0L Diesel (M57/N57): The simple battery-disconnect/key-cycle method is often insufficient. Professional scanner adaptation is mandatory to avoid rough idle, reduced power, or limp mode.
Packing List
-
Electronic Throttle Body Unit × 1
-
Installation Gasket / Seal (if applicable) × 1
-
Warranty Card / Quality Certificate × 1
-
(Optional: Screws / Connector protector – may vary by batch)
How to Ensure You Get the Correct Part
-
Confirm your vehicle model, chassis code, and engine type (3.0L M57 or N57 diesel).
-
Locate the original part number (OE) on your existing throttle body.
-
Compare product photos with your original part (especially connector shape and bolt pattern).
-
Match your OE number with our list above.
-
Contact us with your VIN or a photo of your original part if unsure.
After-Sales & Disclaimer
-
Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.
-
Compatibility: Due to variations in model years, engine codes (M57N, M57TU, N57), and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.
-
Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.
