CHOOSE LOREADA

Throttle Body for Toyota Camry Corolla RAV4 & Scion TC XB 2006–2010 | OE 2203028071 220300H031 678001 | LOREADA

付款方式
  • American Express
  • Diners Club
  • Discover
  • JCB
  • Maestro
  • Mastercard
  • Visa
  • Visa Electron
$61.89 USD
促销价  $61.89 USD 常规价格 
现货

Customize your product

There are three ways to contact staff for customization:Click on the bottom right corner to contact store customer service Add WhatsApp:+86156161182193. Join WhatsApp VIP group: https://chat.whatsapp.com/GekN9JFLM5YCKdFnVAhTDb

Throttle Body for TOYOTA / SCION (Camry / Corolla / RAV4 / Matrix / tC / xB) 2006-2010

OE Numbers: 33750126 / 2203028070 / 14317 / 2203028071 / 220300H031 / 678001

Direct OEM Replacement | 12+24 Month Warranty | 100% Factory Tested


Vehicle Fitment – Compatible with:

Make Model Years Engine (Typical)
Toyota Camry 2006 – 2010 2.4L (2AZ-FE) / 3.5L (2GR-FE)
Toyota Corolla 2006 – 2010 1.8L (1ZZ-FE / 2ZR-FE)
Toyota RAV4 2006 – 2010 2.4L (2AZ-FE) / 3.5L (2GR-FE)
Toyota Matrix 2006 – 2010 1.8L (1ZZ-FE / 2ZR-FE) / 2.4L (2AZ-FE)
Scion tC 2006 – 2010 2.4L (2AZ-FE)
Scion xB 2006 – 2010 2.4L (2AZ-FE)

⚠️ Important: This throttle body fits multiple Toyota/Scion models with 1.8L, 2.4L, and 3.5L petrol engines (1ZZ-FE, 2ZR-FE, 2AZ-FE, 2GR-FE). Please verify your original OE number before ordering. Variations exist between model years, engine codes, and throttle body designs (electronic vs. cable-operated – this is electronic).


OE Cross Reference – Match with your original part:

33750126 , 2203028070 , 14317 , 2203028071 , 220300H031 , 678001

Also compatible with: 22030-2807022030-2807122030-0H03133750-0126 (please confirm)


Technical Specifications

Parameter Specification
Design 100% OEM specification – direct replacement
Installation Fit Exact match in dimensions, connector pinouts, and electrical parameters
Connector Type 6-Pin Oval (Toyota typically uses 6-pin – check your original)
Throttle Bore Diameter 55mm (common for 2AZ-FE: 60mm – confirm with your original)
Housing Material Die-cast Aluminum Alloy + Anti-corrosion Surface Treatment
Butterfly Valve Material Stainless Steel / Anodized Aluminum
Seal Material Oil-resistant Fluorine Rubber (Viton)
Warranty 12 months (general) / 24 months (motor & sensors)

ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.


Product Highlights

✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.


Common Symptoms of a Failing Throttle Body

  • Unstable idle, "hunting," or engine stalling

  • Acceleration lag or delayed throttle pedal response

  • Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.

  • Cruise control malfunction or inoperability


Installation & Adaptation Tips

IMPORTANT: After replacing the Electronic Throttle Body (ETB) on Toyota/Scion vehicles, a throttle self-learning / idle relearn procedure is required.

Step Action
1 Disconnect the negative battery terminal for 5 minutes (clears old learned values).
2 Install the new throttle body, reconnect the plug and hoses.
3 Turn ignition ON (do not start engine) and wait 10 seconds.
4 Turn ignition OFF for 10 seconds.
5 Start the engine and let it idle for 5 minutes (do not touch accelerator).
6 Turn engine off, then restart and drive normally.

For Toyota/Scion: The above procedure typically works. If issues persist, use a professional diagnostic scanner (e.g., Toyota Techstream or compatible tool) to perform a "Throttle Body Learn" or "Idle Relearn".


Packing List

  • Electronic Throttle Body Unit × 1

  • Installation Gasket / Seal (if applicable) × 1

  • Warranty Card / Quality Certificate × 1

  • (Optional: Screws / Connector protector – may vary by batch)


How to Ensure You Get the Correct Part

  1. Confirm your vehicle model and year (2006-2010 Camry, Corolla, RAV4, Matrix, Scion tC/xB).

  2. Locate the original part number (OE) on your existing throttle body.

  3. Compare product photos with your original part (especially connector shape and bolt pattern).

  4. Match your OE number with our list above.

  5. Contact us with your VIN or a photo of your original part if unsure.


After-Sales & Disclaimer

  • Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.

  • Compatibility: Due to variations in model years, engine types (1.8L / 2.4L / 3.5L), and emissions standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.

  • Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.