Model: BL3Z9E926A / BL3Z9E926B
Direct OEM Replacement | 12 Month Warranty | 100% Factory Tested
Vehicle Fitment – Compatible with:
⚠️ Important: Please verify your original OE number before ordering. This throttle body fits specific engine configurations.
OE Cross Reference (Match with your original part)
BL3Z9E926A , BL3Z9E926B , BL3Z-9E926-A , BL3Z-9E926-B
Technical Specifications
ℹ️ If you are unsure about connector type or bore size, please contact us with your VIN or a photo of your original part.
Product Highlights
✅ OE Fitment – Developed to strict OEM standards. Direct replacement – no wiring or programming required for most models (see adaptation notes).
✅ High Performance – Motor response time ≤ 50 ms for precise intake control and improved throttle sensitivity.
✅ Reliability – Built-in dual redundant position sensors prevent idle fluctuations, hunting, and false error codes.
✅ Rigorous Testing – 100% factory-tested for thermal cycling, airtightness, and full-stroke angle calibration.
✅ Standard Compliance – Meets ISO 16750 environmental standards for automotive electrical/electronic equipment.
Common Symptoms of a Failing Throttle Body
-
Unstable idle, "hunting," or engine stalling
-
Acceleration lag or delayed throttle pedal response
-
Check Engine Light (CEL) – common DTCs: P0120, P0220, P2119, etc.
-
Cruise control malfunction or inoperability
Installation & Adaptation Tips
IMPORTANT: After replacing the Electronic Throttle Body (ETB), some vehicles require a throttle self-learning or idle relearn procedure.
For Ford/Lincoln vehicles: The above procedure typically works. If issues persist, use a professional diagnostic scanner to perform a throttle body relearn.
Packing List
-
Electronic Throttle Body Unit × 1
-
Installation Gasket / Seal (if applicable) × 1
-
Warranty Card / Quality Certificate × 1
-
(Optional: Screws / Connector protector – may vary by batch)
How to Ensure You Get the Correct Part
-
Confirm your vehicle model, year, and engine match the fitment table above.
-
Compare product photos with your original part.
-
Locate the original part number (OE) on your component.
-
Match that number with our OE list above.
-
Contact us with your part number if unsure.
After-Sales & Disclaimer
-
Pre-installation check: Inspect the exterior and connector pins for any deformation. Verify the OE number and plug shape before installation.
-
Compatibility: Due to variations in model years, engine types, and emission standards, if you are unsure of fitment, please provide the first 8 digits of your VIN or a photo of your original OE part for verification.
-
Warranty: This product carries a 12-month warranty against non-human damage. The motor and sensors are covered for 24 months.
